Types

 

Gripper Inserts & Positioners

Gripper Inserts & Positioners

 

Grip and penetrate the workpiece to provide superior holding power. Used in jigs, fixtures, and chuck jaws, these grippers and rest pads are versatile enough to fit any number of applications.

 

View Products

Self-Aligning Grippers, Positioners & Thrust Screws

Grippers Thrust Screws

 

Self-aligning components designed to hold and position irregular and contoured surfaces. Contact surfaces include flat steel, Delrin, stainless steel, serrated, diamond surface and Sof-Top urethane. Available in threaded body, hex head or base design (cylindrical body) for mounting.

 

View Products

Locating Pins & Receivers

Locating Pins & Receivers

 

Traditional work locating pins for alignment and precision locating.

 

View Products

 

Fixture Clamps

Fixture Clamps

 

A wide assortment of manual style clamps that are adaptable to different industrial applications and systems.

 

View Products

Spring Loaded Work Supports

Spring Loaded Work Supports

 

Designed to provide proper workpiece support. The spring loaded plunger retracts into the body of the support when the workpiece is put in place. The plunger can then be locked into placed by tightening the knob.

 

View Products

Vises & Accessories

Vises & Accessories

 

TriMax vises are matched for today’s manufacturing demands and provide all the versatility you need in a small footprint. In addition to TriMax Series Vise line, complete Kurt vise sets are available that include custom 6 inch jaws that utilize TG GripSert inserts for low profile clamping.

 

View Products

 

Line up

Angle Grippers, Tool Steel, Carbide Tipped & Carbide (HS, CT, FSC)

Solid carbide, carbide tipped or tool steel.

Ball End Locating Pins with Shoulder (03108)

Diamond or round. Steel or stainless steel.

Ball End Locating Pins without Shoulder (03107)

Diamond or round. Steel or stainless steel.

Base Design Swivots Gripper Assemblies (BBU)

Urethane, Delrin, abrasive diamond, flat tool steel or serrated.

C Series Base Vise Sets

Choose from four base lengths and three base widths.

Cam Push Clamps (QLCP)

Steel cam handle and body.

Cam Side Clamps (QLSCH)

Steel cam handle, body and jaw.

Compact Hook Clamps (BJ132)

Compact hook clamps, flanged holder, cylindrical holder.

Compact Modular Pit Bull Clamps

Knife edge or blunt edge.

Compact Rear Mount Toe Clamps (CP106)

High holding power and low profile.

Compact Side Cam Clamps

Positive down force while using very little space on a fixture.

Compact Spiral Cam Clamps (CP135)

With or without clamping plate.

Compact Spring Loaded Cam Work Supports (BJ362)

Supports up to 89 lbs. Die cast zinc handle, steel body.

Compact Toe Clamps (CP104)

Jaw moves forward and downward as the clamp is tightened.

Cylindrical Spring Loaded Supports (BJ351)

Heavy duty capacity. Mounts through the center of the body.

Double Pull Clamp Modules (CP151)

Used with CP155 and CP156 clamping screws.

Dyna Force Clamps

Clamp jaws advance on an angle for positive down-force.

Edge Grippers, Tool Steel (HSE)

C'bore mount. Diamond or straight serration.

Extension Bolts for Work Supports (KBJ610)

Threaded mount, tapped hole.

Fixed Grippers & Rest Pads (CR, CS, CC)

Round, rectangular or square. Carbide.

Flanged Pull Clamp Modules (CP150)

Used with CP155 clamping screws.

G Series Vises

Jaw include TG GripSerts workholding grippers

GP Series Gripper Pads (GP, GPA)

1-1/4" square or rectangular strip. Fine hatch, hatch or smooth surface.

Headed Design Thrust Screws (TSH)

Urethane, Delrin, serrated steel or abrasive diamond.

Heavy Duty Pull Clamps (QLPDH)

Clamping force: 1,348 to 1,798 lbs. Clamp bodies, pins, screws.

Heavy Duty Spring Loaded Supports

Supports up to 3,800 lbs.With or without tip.

Hex Cam Clamps

Hardened steel socket head cap screw. Offset head and brass hex washer.

Hex Head Adjustable Grippers, Replaceable Pad (AJH)

Replaceable gripper held in place with a differential lock screw.

Hex Head Swivots Gripper Assemblies (BUH)

Urethane, Delrin, abrasive diamond, flat tool steel or serrated.

High Profile Rest Pads (KBJ810)

Serrated, radius or flat.

Hold Down Snap Clamps (QLSND)

One-touch snap clamp. Positive clamping in one smooth operation

Horizontal Thrust Clamps (QLRC)

Push the bar through the center of clamping body until contact is made with the workpiece.

Horizontal Toggle Clamps with Flat Base (05900)

Plastic handle with steel or stainless steel body. With or without safety lock.

ID Expansion Clamps

Hold internal diameters from under 3/16” to over 4”. Ideal for variations in inside diameter.

ID Wedge Clamps (CP130)

Diameters expand from 19.5 mm up to 36 mm. Ideal for variations in inside diameter.

Knife Edge Cam Clamps

Low profile cam clamp.

Kopal Clamps & Stops

Swivel & raised stops. Low profile or mini cam clamps.

Kurt DX6 Vises

Equipped with standard Kurt 6" jaws.

Kurt DX6 with TG GripSert Jaws

Equipped with TG GripSert jaws. (Inserts sold separately.)

Low Profile Locating Pins

Round or diamond.

M Series Double Vises

Hold two work pieces one one vise for double clamping capability.

M Series Standard Vises

Clamping capacity up to 400mm. 150mm or 200mm width.

M Series XL Vises

Extend vise base length up to 878mm.

Machinable Cam Clamps

Hold round or irregularly shaped workpieces directly to a fixture plate or stop.

Machinable Pit Bull Clamps

Heat treated tool steel.

Mini Cam Toe Clamps (QLSCL)

With or without handle.

Mini Hold Down Snap Clamps (QLSNDM)

Steel with black oxide or nickel-plated finish, or stainless steel.

Mini Swing Clamps with Adjustable Handle (QLSWC-K)

Clockwise or counterclockwise clamping.

Mini Swing Clamps with Cam Handle (QLSWC)

Black oxide or nickel-plated finish.

Mini Swing Clamps with Standard Handle (QLSWC)

Black oxide or nickel-plated finish.

Mini Torque Control Swing Clamps (QLSWC)

Torque wrench or removable handle activates clamping.

Mini Wedge Clamps (CP132)

Clamps two workpieces against fixed stops. Countersunk head screw or socket head cap screw.

OD Holding Clamps (CP120)

For 65 and 90 mm diameter jaws. Aluminum jaws can be machined to custom fit the workpiece.

Pit Bull Clamps

Steel or brass with blunt or knife edge.

Pneumatic OD Holding Clamps (AMCH-W)

For 65 and 90 mm diameter jaws. Aluminum jaws can be machined to custom fit the workpiece.

Pneumatic Pull Clamps (AMWPD)

Pull clamp, clamping pin, clamping screw.

Pneumatic Swing Clamps (AMWSW)

Standard, rod, thread detecting ports or gasket detecting ports.

Push Block Clamps with Cap Screw

Use push block clamp with V-pad to clamp round workpieces.

Push Type Snap Clamps (QLSNS)

Snap-on system provides uniform and positive clamping in one smooth operation.

Recessed Mount Hook Clamps (BJ130)

Used with hook clamp holder or installed in blocks.

Retractable Clamps (QLRE)

One-Touch miniature clamp with cam handle.

Round Grippers, Carbide Tipped (CT)

Diamond serration, tapped.

Round Grippers, Solid Carbide (FSC)

Whistle stop, tapped with flat side or tapped with keyway.

Round Grippers, Tool Steel (HS)

Tapped or C'bore. Diamond serration, straight serration or single point.

Round OD Holding Clamps (CP123)

Aluminum jaws can be machined to custom fit contoured or odd shaped parts.

Round Rest Pads (SRP, CSRP, DRP, CRP)

Tapped or C'bore. Delrin, hardened steel, stainless steel or solid carbide.

S Series Vises

Equipped Premium TG GripSert jaws with TG-STD inserts (for steel).

Single Jaw Side Clamps (CP101)

For smaller clamping spaces.

Single Pull Clamp Modules (CP152)

Used to locate and clamp a workpiece in conjunction with CP155 clamping screws.

Spiral Cam Clamps (BJ161)

Positive locking side clamp.

Spring Loaded Locators (CP710)

Standard or accurate type.

Square Grippers, Tool Steel (HS)

Tapped or C'bore. Diamond serration or straight serration.

Square OD Holding Clamps (CP124)

Aluminum jaws can be machined to custom fit contoured or odd shaped parts.

Standard Pull Clamps (QLPD)

Clamping Force: 200 to 500 lbs. Clamp bodies, pins, screws. With or without handle.

Standard Push Clamps (QLPU)

With or without handle.

Swivel Contact Bolts (BJ730)

Steel body, stainless steel ball.

T Series Vises

Complete vise set for clamping up to four workpieces at a time.

TG GripSert Inserts

For steel, steel/titanium or aluminum workpieces.

Threaded Body Swivots Gripper Assemblies (TBU)

Urethane, Delrin, abrasive diamond, flat steel or serrated.

Threaded Body Thrust Screws (TST)

Urethane, Delrin, serrated steel, stainless steel or abrasive diamond.

T-Slot Mount Cam Clamps

Brass hex, steel body. Locks into machine T-slot.

Uniforce Wedge Clamps

Steel wedge spreads clamping force uniformly on both sides.

Uniforce Wedge Clamps, Machinable

Machinable jaws. Steel wedge spreads clamping force uniformly on both sides.

Wedge Clamps (VF)

Smooth, serrated or machinable jaws.

Wide Jaw Side Clamps (CP102)

1.5 degrees jaw swivel from center to allow for clamping on uneven surfaces.