Work Locating & Positioning Elements

Work locating

 

When it comes to innovation in workholding and fixturing, Imao-Fixtureworks is your source for innovative solutions. Whether you are looking for workholding grippers, positioners, locating pins or work supports, Imao-Fixtureworks offers a variety of solutions to get the job done faster and easier. From the precision of Flex Locators and SpeedLoc system to the innovative 5-axis modular pull clamp system as well as pneumatic options for locating and clamping, Fixtureworks offers solutions— whether you own a small shop or are an application engineer responsible for multiple production facilities.

BENEFITS

 

EFFICIENT

EFFICIENT

Increase speeds and feeds with workholding grippers, and load and unload workpiece faster with One Touch Clamps and innovative spring-loaded supports — no tools needed to clamp!

ECONOMICAL

ECONOMICAL

Save your jaws! Our easily replaceable workholding grippers are the ideal contact wear surface for vise jaws, collet jaws and more.

ERGONOMIC

ERGONOMIC

Throw a lever. Rotate a knob. Press a button. Our One Touch lineup of clamps and fasteners make it safer and easier for operators to do their jobs, especially where tasks are repetitive and frequent.

precision

PRECISE

Our locators allow for easy fastening and precision locating in one operation.

Types

 

Gripper Inserts & Positioners

Gripper Inserts & Positioners

 

Grip and penetrate the workpiece to provide superior holding power. Used in jigs, fixtures, and chuck jaws, these grippers and rest pads are versatile enough to fit any number of applications.

 

View Products

Self-Aligning Grippers, Positioners & Thrust Screws

Grippers Thrust Screws

 

Self-aligning components designed to hold and position irregular and contoured surfaces. Contact surfaces include flat steel, Delrin, stainless steel, serrated, diamond surface and Sof-Top urethane. Available in threaded body, hex head or base design (cylindrical body) for mounting.

 

View Products

Lateral Spring Positioners

Lateral Spring Positioners

 

Adjustable, spring-loaded positioning pins designed to push workpieces into place for easy loading.

 

View Products

 

Locating Pins & Receivers

Locating Pins & Receivers

 

Traditional work locating pins for alignment and precision locating.

 

View Products

Pneumatic Assisted Work Supports

Pneumatic Work Supports

 

These compact pneumatic supports allow for remote-control activation and simultaneous control of multiple supports .The spring-loaded piston is compressed under the workpiece. After the workpiece is clamped, air is applied to lock into position.

 

View Products

Pneumatic Clamping Locators

Pneumatic Clamping Locators

 

Pneumatic quick locating and clamping eliminates set up time in frequent changeover of fixtures, plates and toolings on automation machinery. These Air Flex locators/receivers provide quick change of fixture or tool within 0.003 mm repeat accuracy.

 

View Products

 

Spring Loaded Work Supports

Spring Loaded Work Supports

 

Designed to provide proper workpiece support. The spring loaded plunger retracts into the body of the support when the workpiece is put in place. The plunger can then be locked into placed by tightening the knob.

 

View Products

Work Supports, Stops & Rests

Work Supports & Stops

 

Fixtureworks’ line of supports and stops are designed to assist during the machining, assembly, or inspection process by properly positioning the workpiece. Used to locate, stop, or support a workpiece in a wide range of applications and environments.

 

View Products

 

 

Line up

AccuGrip Adjustable Grippers, Carbide Tipped (ACG)

Adjustable Gripper, Housing and Lock Screw. Smooth or fine tooth pattern.

Adjustable Jack Screws (BJ332)

For height adjustment.

Adjustable Screw Jacks

Screw jacks and screw jack tips.

Air Flex Light Locators (AMWF)

Port or Direct type pneumatic pin.

Air Flex Light Receivers (AMWF-BU)

Used with AMWF-L-S series pneumatic locator pin.

Air Flex Locators (AMWF-W)

Straight or tapered pneumatic pin.

Air Flex Receivers (AMWF-BU)

Used with AMWF-W series pneumatic locator pin.

Angle Grippers, Tool Steel, Carbide Tipped & Carbide (HS, CT, FSC)

Solid carbide, carbide tipped or tool steel.

Assembly Tool for Press Fit Lateral Positioning Pins (03330)

Designed to make installation easy without damaging the plunger.

Ball End Locating Pins with Shoulder (03108)

Diamond or round. Steel or stainless steel.

Ball End Locating Pins without Shoulder (03107)

Diamond or round. Steel or stainless steel.

Base Design Swivots Gripper Assemblies (BBU)

Urethane, Delrin, abrasive diamond, flat tool steel or serrated.

Blind Style Locators (CP720)

Flex locator system.

Blind Style Protective Covers (CP725)

Used keep out dirt and contaminants out of blind-style receivers.

Clamping Screws (CP156)

Used with CP150 series double clamping modules.

Compact Spring Loaded Cam Work Supports (BJ362)

Supports up to 89 lbs. Die cast zinc handle, steel body.

Cylindrical Spring Loaded Supports (BJ351)

Heavy duty capacity. Mounts through the center of the body.

Diamond Taper Clamping Screw (CP155-D)

Used to locate a workpiece or clamping module in conjunction with CP155-L round-type screws.

Double Clamping Pin (CP158)

Used to couple clamping modules CP150, CP151 or CP152.

Double Pull Clamp Modules (CP151)

Used with CP155 and CP156 clamping screws.

Edge Grippers, Tool Steel (HSE)

C'bore mount. Diamond or straight serration.

Extendable Work Locators with Adjustable Handle (CP701)

Locating pins are mounted in the extendable piston.

Extendable Work Supports with Knob (CP300)

Supports up to 202 lbs. Tapped work support piston.

Extension Bolts for Work Supports (KBJ610)

Threaded mount, tapped hole.

Fixed Grippers & Rest Pads (CR, CS, CC)

Round, rectangular or square. Carbide.

Flanged Pull Clamp Modules (CP150)

Used with CP155 clamping screws.

GP Series Gripper Pads (GP, GPA)

1-1/4" square or rectangular strip. Fine hatch, hatch or smooth surface.

Headed Design Thrust Screws (TSH)

Urethane, Delrin, serrated steel or abrasive diamond.

Heavy Duty Spring Loaded Supports

Supports up to 3,800 lbs.With or without tip.

Hex Flex Locators (CP730)

Tapered or straight.

Hex Head Adjustable Grippers, Replaceable Pad (AJH)

Replaceable gripper held in place with a differential lock screw.

Hex Head Swivots Gripper Assemblies (BUH)

Urethane, Delrin, abrasive diamond, flat tool steel or serrated.

Hex Socket Toggle Screws (F131)

Steel pad swivels 3.5 degrees from center.

High Profile Rest Pads (KBJ810)

Serrated, radius or flat.

Knurled Head Screws

Steel or stainless steel.

Lateral Positioning Pins (ELP)

Steel or stainless steel.

Long Travel Supports & Accessories (AWS)

Supports up to 40,000 lbs. 3-1/8 to 24 inches max height.

Low Profile Locating Pins

Round or diamond.

Mini Adjustable Stops (BJ211)

Up to 80 mm thread length. Alloy steel.

Mini Adjustable Stops, Short (BJ211)

Up to 56 mm thread length. Alloy steel.

Miniature Riser Cylinders (BJ601)

Threaded mount, tapped hole.

Pneumatic Work Supports (BJ370)

For remote activation.

Precision Locating Bushing (CP159)

Used with CP152 modular clamps on a base plate.

Precision Tapered Bushing (CP157-L)

Used to locate CP150 flanged clamping modules on a base plate.

Quarter Turn Flex Locators (CP723)

Stainless knob and pin, steel body.

Retractable Work Locators (CP700)

Plastic knob, steel body.

Round Grippers, Carbide Tipped (CT)

Diamond serration, tapped.

Round Grippers, Solid Carbide (FSC)

Whistle stop, tapped with flat side or tapped with keyway.

Round Grippers, Tool Steel (HS)

Tapped or C'bore. Diamond serration, straight serration or single point.

Round Rest Pads (SRP, CSRP, DRP, CRP)

Tapped or C'bore. Delrin, hardened steel, stainless steel or solid carbide.

Round Taper Clamping Screw (CP155-L)

Used to locate a workpiece or clamping module in conjunction with CP155-D diamond-type screws.

Single Pull Clamp Modules (CP152)

Used to locate and clamp a workpiece in conjunction with CP155 clamping screws.

SpeedLoc Bolt-in Receivers (MPAR)

SpeedLoc system receiver.

SpeedLoc Docking Hardware (MP-DH)

SpeedLoc system docking plate and positioning stud.

SpeedLoc Flush Mount Locators (MPAS)

SpeedLoc system locator.

SpeedLoc Standard Bushings (MPAL)

SpeedLoc system. Steel.

SpeedLoc Standard Locators (MPAS)

SpeedLoc system locator.

SpeedLoc Stepped Bushings (MPAL)

SpeedLoc system. Steel.

SpeedLoc Thread-in Receivers (MPAR)

SpeedLoc system receiver.

Spring Loaded Locators (CP710)

Standard or accurate type.

Square Grippers, Tool Steel (HS)

Tapped or C'bore. Diamond serration or straight serration.

Standard Riser Cylinders (BJ600)

Threaded mount, tapped hole.

Standard Tapered Bushing (CP157-S)

Used to locate CP150 flanged clamping modules on a base plate.

Support Cylinders (BJ300)

Socket headed cap screw mount.

Swivel Contact Bolts (BJ730)

Steel body, stainless steel ball.

TG GripSert Covers

Prevent dirt and debris from building up inside the TG GripSerts slots.

TG GripSert Cutting Tool

3-fluted cutting tool end, solid carbide.

TG GripSert Inserts

For steel, steel/titanium or aluminum workpieces.

TG GripSert Screws

10-pack of Torx T9 screws.

TG GripSert Wrench

Used to install or remove TG inserts from jaws.

Threaded Body Swivots Gripper Assemblies (TBU)

Urethane, Delrin, abrasive diamond, flat steel or serrated.

Threaded Body Thrust Screws (TST)

Urethane, Delrin, serrated steel, stainless steel or abrasive diamond.

Threaded Jack Screw Support (BJ331)

Replaceable threaded jack screw support.

Through Style Protective Covers (CP726)

Used keep out dirt and contaminants out of through-style receivers.

Tips for Lateral Positioning Pins (ELPT)

Blank, Ball, Standard and Pin styles

V-Blocks (BJ440)

Mini horizontal. 1045 steel.